Some systems are experiencing issues

About This Site

Welcome to the status page of i3D.net. Any known issues affecting any of our services will be tracked on this page. Potential impact may vary from customer to customer depending on the systems or services impacted.

All times used on this page will be in the UTC timezone.

You can subscribe to receive an email as soon as a status update has been published. You may consult our Privacy Statement for more information on the processing of your personal data.

Please reach out to our support team through our website or support@i3d.net if you have any questions or need help.

We are also available 24/7 by phone on the following phone numbers:

+31 (0)10 890 00 70

1-800-482-6910

Maintenance
[Power Maintenance] Busbar Replacement - Rotterdam – March 31, 2026

Dear Client,

We would like to notify you of upcoming power maintenance activities that will affect services in our Rotterdam datacenter. The power maintenance has been scheduled for March 31, 2026.

Location: Rotterdam, The Netherlands

Schedule: Start time: March 31, 2026, 05:00 UTC End time: March 31, 2026, 16:00 UTC Planned impact: Reduced redundancy (see below for details)

Reason for this maintenance: The maintenance is required to address a faulty busbar. This critical replacement will enhance system reliability and ensure consistent performance moving forward.

Expected impact: Reduced redundancy: No impact expected but there will be no UPS backup. To ensure there is no impact we will run the generators in sync with the grid.

Support: Our support department will be open during the maintenance. More details about how you can contact our support can be found here: https://i3d.net/support/ You can find maintenance updates and the current situation at https://status.i3d.net/

[Network Maintenance] Router Software Upgrade - Oslo - April 1, 2026

Dear Client,

We would like to notify you of upcoming network maintenance activities that will affect services in our Oslo datacenter. The network maintenance has been scheduled for April 1, 2026.

Location: Oslo, Norway

Schedule: Start time: April 1, 2026, 04:00 UTC End time: April 1, 2026, 07:00 UTC Planned impact: No impact (see below for details)

Reason for this maintenance: We will be performing firmware upgrades on our router(s) to improve quality and ensure long-term reliability.

Expected impact: No Impact: No impact is expected for this maintenance, as the traffic will be routed via alternate paths.

Support: Our support department will be open during the maintenance. More details about how you can contact our support can be found here: https://i3d.net/support/ You can find maintenance updates and the current situation at https://status.i3d.net/

[Power Maintenance] Breaker Maintenance Powerhouse 1 - Rotterdam – April 29

Dear Client,

We would like to notify you of upcoming power maintenance activities that will affect services in our Rotterdam datacenter. The power maintenance has been scheduled for April 29, 2026

Location: Rotterdam, The Netherlands Suite 2 A Feed Suite 19 A and A+ Feed Suite 34 A and A+ Feed

Schedule: Start time: April 29, 2026, 08:00 UTC End time: April 29, 2026, 12:00 UTC Planned impact: Impact expected (see below for details)

Reason for this maintenance: Mandatory maintenance to ensure the safety, reliability and correct operation of our main power infrastructure.

Expected impact: Reduced redundancy: During the maintenance window, one of the power feeds supplying Suite 2, 19 and 34 will be temporarily unavailable. Power will remain available through the remaining feed(s), but power redundancy will be reduced for approximately 4 hours.

Please note that devices with a single power supply (single PSU) or devices connected only to the A feed will experience a service interruption during this maintenance window. Devices with dual power supplies connected to separate feeds are expected to remain online.

Support: Our support department will be open during the maintenance. More details about how you can contact our support can be found here: i3d.net/support

[Cooling Maintenance] Water Cooling Pump Maintenance - Rotterdam – May 4, 2026

Dear Client,

We would like to notify you of upcoming cooling maintenance activities that will affect services in our Rotterdam datacenter. The water cooling pump maintenance has been scheduled for May 4, 2026.

Location: Rotterdam, The Netherlands

Schedule: Start time: May 4, 2026, 07:00 UTC End time: May 4, 2026, 15:30 UTC Planned impact: No impact (see below for details)

Reason for this maintenance: Our vendor will be performing a maintenance on the water pumps in our Rotterdam datacenter.

Expected impact: No Impact: No impact is expected, as maintenance activities will be performed on each water pump individually, with the team waiting for each pump to return to operation before proceeding to the next.

Support: Our support department will be open during the maintenance. More details about how you can contact our support can be found here: https://i3d.net/support/ You can find maintenance updates and the current situation at https://status.i3d.net/

[Power Maintenance] Generator On-load Test - Rotterdam – May 5, 2026

Dear Client,

We would like to notify you of upcoming power maintenance activities that will affect services in our Rotterdam datacenter. The power maintenance has been scheduled for May 5, 2026

Location: Rotterdam, The Netherlands

Original window: Start time: May 5, 2026, 06:00 UTC End time: May 5, 2026, 09:00 UTC Planned impact: No impact (see below for details)

Reason for this maintenance: To ensure the proper functioning of our power infrastructure, our generators will undergo an on-load test run.

Expected impact: No Impact: No impact is expected for this maintenance, as there is no outage for the power systems. Customers in the datacenter at the time of the maintenance can hear loud noises.

Support: Our support department will be open during the maintenance. More details about how you can contact our support can be found here: https://i3d.net/support/

Past Incidents

Wednesday 12th, August 2020

US: Dallas Backbone link between Ashburn and Dallas datacenters

At this moment we are experiencing problems with: Backbone link between our Ashburn and Dallas datacenters

The cause of the incident is currently: Issues with the WDM system.

We have taken the following actions to resolve the incident: We are currently monitoring the situation and have reached out to our vendor for updates.

Estimated time of repair: N/A

Impact: Due to the current ongoing incident on our backbone link between our Ashburn and Dallas datacenters, user traffic between Ashburn and Dallas, as well as Ashburn and Chicago, may experience increased latency / packet loss.

Support: Our support department is available for more information and personal updates. New updates will be posted here. More details about how you can contact our support can be found here.

Subscribe for the latest updates. You may consult our Privacy Statement for more information on the processing of your personal data.

  • Replacement is complete. Issue has been resolved.

  • Tuesday 11th, August 2020

    No incidents reported

    Monday 10th, August 2020

    No incidents reported

    Sunday 9th, August 2020

    No incidents reported

    Saturday 8th, August 2020

    No incidents reported

    Friday 7th, August 2020

    No incidents reported

    Thursday 6th, August 2020

    NL: Rotterdam Rotterdam network

    At this moment we are experiencing problems with: One of the router linecards in a core router in Rotterdam had a hardware problem affecting a group of 4x100G ports. Our engineers are in contact with the vendor to replace the affected linecard.

    The cause of the incident is currently: known

    We have taken the following actions to resolve the incident: The 4x100G ports in question will remain admin-disabled until that hardware replacement is done.

    Estimated time of repair: Full repair is unknown at this moment, we disabled the ports, which repaired the traffic flows.

    Impact: Because of the linecard hardware problem a traffic drop occured on all traffic handled by these ports.

    Support: Our support department is available for more information and personal updates. New updates will be posted here. More details about how you can contact our support can be found here.

    Subscribe for the latest updates. You may consult our Privacy Statement for more information on the processing of your personal data.

  • Update 14:27 UTC We've moved the affected 100G ports to another line-card, we are 100% redundant again

    We can confirm that with disabling the affected ports everything remains stable. Because we have enough overcapacity on our router we are not at risk. We will keep a close eye on the router behaviour coming hours.

  • Control panel i3D.net Control panel login issues

    At this moment we are experiencing problems with: login issues on our control panel

    The cause of the incident is currently: Known

    We have taken the following actions to resolve the incident: Our developers are working on resolving this issue.

    Estimated time of repair: 30 minutes

    Impact: It is possible that you will experience problems logging in on customer.i3d.net. The cause has been found and our developers are working on a fix. If you are experiencing this issue we suggest to try a different browser.

    Support: Our support department is available for more information and personal updates. New updates will be posted here. More details about how you can contact our support can be found here.

    Subscribe for the latest updates. You may consult our Privacy Statement for more information on the processing of your personal data.

  • This issue has been resolved by our developers. If you still experience issues, please get in contact with us.